Basic Operations; Loading Documents; How To Load Documents; Sending Non-Standard Size Documents - Panasonic DP-1810F Operating Instructions Manual

Basic Operations

Loading Documents

How to Load Documents

1. On the ADF / Inverting ADF
• Place the original(s) Face Up on the ADF until the
leading edge placed into the machine stops.

Sending Non-Standard Size Documents

When transmitting non-standard size document(s),
the machine may perform Rotate Transmission
automatically and not transmit the portion of the
document that exceeds the standard size ("P"
portion). (See Note 1)

Flatbed Scanning

Place a book or an original face down on the Platen Glass, then press
original size. The message "ANOTHER ORIGINAL?" is shown
on the LCD display when
• If you wish to store another page, press
• If is pressed, the machine starts to dial the telephone number.
2:NO
1. When an oversized original is sent to another machine, sometimes, it is reduced in accordance
NOTE
with the other party's recording paper size.
Ex:
Face Up
Original Size
Guide
Direction
is pressed and the scanning is completed.
START
and place another original, then press
1:YES
A3 size
2. On the Platen Glass
• Place a book or an original Face Down on the
Platen Glass, aligning it with the arrow mark on the
original size guides.
Rotation XMT
P
The part which
protrudes from the
Fixed size is not sent.
ORIGINAL SIZE
A4 size
Face Down
Original Size
Guide
to select the
.
START
33