Panasonic DP-1810F Operating Instructions Manual page 31

Fax Parameter Table
No. Parameter
048 TELEPHONE LINE
049 PSTN ACCESS CODE
052 DIAGNOSTIC
PASSWORD
053 SUB-ADDRESS
PASSWORD
057 COUNTRY CODE
063 PC-FAX RCV MODE
077 DEPARTMENT CODE
078 ROTATION XMT
082 QUICK MEMORY XMT
097 SPECIAL TRAY
No.1 - 3
099 MEMORY SIZE
(Flash Memory)
1. The standard settings are printed on the Fax Parameter List. To print out Fax Parameter List,
NOTE
see page 133.
2. The contents of Fax Parameter may differ depending on the each country's regulation or
specification.
Setting
Setting
Number
1 PSTN Selecting the type of line connected.
2 PBX
(----) Setting PSTN Access Code. (max. 4 digits)
(----) Setting the password for Remote Diagnostic Mode. Please
ask your Panasonic Authorized Dealer for details.
(----) Setting a 20-digit password for secured sub-address
communication.
Selecting the country code when installing your machine.
1 Print Selecting how the machine will execute the received Fax
document(s).
2 Upload &
Print
Print
Upload & Print : Print the received document(s) and
3 Upload
Upload
1 Invalid Selecting whether the machine performs the Department
Code operation. (See page 94)
2 Valid
1 Invalid Selecting
transmission.
2 Valid
1 Invalid Selecting whether the machine performs Quick Memory
Transmission. (See page 39 to 43)
2 Valid
Invalid :Stores all documents into memory first before
Valid
1 None Select up to 3 Special Trays that will not be used for
printing received faxes (4-Tray configuration). One Tray
2 Tray 1
must always be available for receiving Faxes.
3 Tray 2
(You can specify one Tray (1 ~ 4) for each selection No. 1,
No. 2 and/or No. 3)
4 Tray3
5 Tray 4
- - Displays the amount of base and optional memory
installed.
(Base Memory + Optional Memory)
Customizing Your Machine
Comments
: Print the received document(s).
upload it's file.
: Upload the received document file.
whether the machine
dialling the telephone number.
:Starts dialling the telephone number immediately
after storing the first page.
performs rotation
31