Memory Transmission
One-Touch Dialling
One-Touch Dialling allows you to dial a full telephone number by pressing a single key. To set up the One-
Touch keys, see page 23.
Make sure that the FAX/EMAIL lamp is ON. If not, press
1a
Place original(s) face up on the ADF.
or
1b
Place a book or an original face down on the Platen Glass.
1
Press
2
2
M2/ MEM XMT
Make sure that the MEMORY lamp is on.
If not, press
3
Press a One-Touch key.
Ex:
01
4
The document(s) begin to store into memory with a file
number.
Then starts dialling the telephone number immediately
after storing the first page. (See Note 1)
The remaining page(s) continue to store into memory.
1. This feature is called "Quick Memory Transmission". If you wish to store All the document(s)
NOTE
into memory first before transmitting, change the Fax Parameter No. 082 (QUICK MEMORY
XMT) to " Invalid". (See page 31)
to select the original size.
ORIGINAL SIZE
to set "On".
M2/MEM XMT
Sending Documents
to select the "FAX/EMAIL" mode.
ENTER STATION(S)
THEN PRESS START 00%
<01>(Station name)
5551234
* STORE *
PAGES=001
* DIALLING *
(Station name)
NO.002
05%
NO.002
41