Configure Advanced Radio Settings - NETGEAR FVS318N Reference Manual

With either method, the wireless VPN firewall tries to communicate with the wireless
device, set the wireless security for the wireless device, and allow it to join the wireless
network.
Note: There is no physical WPS push button on the wireless VPN firewall.

Configure Advanced Radio Settings


To configure advanced radio settings:
1. Select Network Configuration > Wireless Settings > Radio Settings. The Radio
Settings screen displays (see
2. Click the Advanced option arrow in the upper right of the Radio Settings screen. The
Advanced Wireless screen displays:
Figure 52.
3. Specify the settings as explained in the following table:
Table 25. Advanced Wireless screen settings
Setting
Beacon Interval
DTIM Interval
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 44
Description
Enter an interval between 40 ms and 3500 ms for each beacon transmission,
which allows the wireless VPN firewall to synchronize the wireless network. The
default setting is 100.
Enter the Delivery Traffic Indication Message (DTIM) interval, also referred to
as the data beacon rate, which indicates the period for the beacon DTIM in
multiples of beacon intervals. This value needs to be between 1 and 255. The
default setting is 2.
Wireless Configuration and Security
on page 86).
104