Table of Contents
Advertisement
15.
To set up a redirect URL, select the URL radio button and enter the URL for the page to which you want
to redirect users to in the field.
After visitors agree to the terms and conditions, they are redirected to this page.
16.
Click the Apply button.
Your settings are saved.
View or Change Advanced WiFi Settings
To view or change advanced WiFi settings:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2.
Enter orbilogin.com.
A login window opens.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
Note
The backhaul password is a security key that is used in WiFi communication between
the router and the satellite. For information about generating a new backhaul password,
see
Generate a New Backhaul Password
5.
In the Region list,- select your region.
In some locations, you cannot change this setting.
6.
To control the SSID broadcast, select or clear the Enable SSID Broadcast check box.
When this check box is selected, the router broadcasts its network name (SSID) so that it displays when
you scan for local WiFi networks on your computer or WiFi device.
7.
Click the Apply button.
Your settings are saved.
Use the Router as a WiFi Access Point
You can set up the router to run as an access point (AP) on the same local network as another router or
gateway.
For example, you can use the Orbi router as a WiFi access point that connects to a gateway or modem
router that you already use for your Internet service. In this situation, you do not need to change the settings
for the gateway or modem router.
Orbi Pro
on page 71.
Specify Network Settings
69
Advertisement
Table of Contents
