Rear Panel - NETGEAR FVS318N Reference Manual

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Rear Panel

The rear panel of the wireless VPN firewall includes a cable lock receptacle, a console port, a
Reset button, and a DC power connection.
Rear Panel
(2) Security lock
receptacle
Figure 2.
Viewed from left to right, the rear panel contains the following components:
1. Detachable dipole antenna.
2. Cable security lock receptacle.
3. Console port. Port for connecting to an optional console terminal. The port has a DB9 male
connector. The default baud rate is 9600 K. The pinouts are (2) Tx, (3) Rx, (5) and (7) Gnd.
4. Factory default Reset button. Using a sharp object, press and hold this button for about
8 seconds until the front panel Test LED flashes to reset the wireless VPN firewall to factory
default settings. All configuration settings are lost, and the default password is restored.
5. DC power plug receptacle. Power input is 12VDC, 1A. The power plug is localized to the
country of sale.
6. Power On/Off switch.
7. Detachable dipole antenna.
Antennas
(1) and (7)
(4) Factory default
Reset button
(3) Console port
Introduction
17
(6) Power
switch
(5) DC power
receptacle