Manage The Advanced Wifi Settings - NETGEAR SXK30 User Manual

Orbi Pro WiFi 6 Mini Router SXR30 and Orbi Pro WiFi 6 Mini Satellite SXS30
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Settings page displays the admin WiFi settings.
Note: Even though this is the page for the admin WiFi settings, the bandwidth ratios
that you specify on this page apply to the admin WiFi network, employee WiFi
network, IoT WiFi network, and guest WiFi network. (All bandwidth ratios together
must add up to 100 percent.) Similarly, if you specify bandwidth ratios on the
employee WiFi settings page, IoT WiFi settings page, or the guest WiFi network
page, they also apply to all other WiFi networks.
5. Select the Enable Bandwidth per SSID check box.
In the Bandwidth per SSID graphic, the colored icons are enabled.
6. Specify the bandwidth ratios by moving the icons on the bandwidth line.
The icons represent the following WiFi networks:
• Blue: Admin WiFi network (Wireless 1).
• Green: Employee WiFi network (Wireless 2).
• Purple: IoT WiFi network (Wireless 3).
• Gray: Guest WiFi network.
As you move an icon, the bandwidth ratio for the WiFi network changes and the
percentage displays in the icon.
All bandwidth ratios together add up to 100 percent of the available download
bandwidth. If you change one ratio, the ratio for another WiFi network might also
change.
7. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.

Manage the advanced WiFi settings

Depending on the advanced WiFi setting, the setting applies either to all WiFi networks
on a radio or to all WiFi networks on the router. That is, these settings do not apply to
one individual WiFi network only.
Manage the WiFi Settings 89 User Manual