NETGEAR FVS318N Reference Manual page 150

2. Enter the settings as explained in the following table:
Table 33. IP/MAC Binding screen settings
Setting
Email IP/MAC Violations
Do you want to
enable E-mail Logs
for IP/MAC Binding
Violation?
IP/MAC Bindings
Name
MAC Address
IP Address
Log Dropped
Packets
3. Click the Add table button. The new IP/MAC rule is added to the IP/MAC Bindings table.
4. Click Apply to save your changes.

To edit an IP/MAC binding:
1. In the IP/MAC Bindings table, click the Edit table button to the right of the IP/MAC
binding that you want to edit. The Edit IP/MAC Binding screen displays.
2. Modify the settings that you wish to change (see the previous table).
3. Click Apply to save your changes. The modified IP/MAC binding displays in the IP/MAC
Bindings table.

To remove one or more IP/MAC bindings from the table:
1. Select the check box to the left of each IP/MAC binding that you want to delete, or click
the Select All table button to select all bindings.
2. Click the Delete table button.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
Select one of the following radio buttons:
• Yes. IP/MAC binding violations are emailed.
• No. IP/MAC binding violations are not emailed.
Note: Click the Firewall Logs & E-mail page link to ensure that emailing of logs is
enabled on the Firewall Logs & E-mail screen (see
Event Notifications on page 293).
A descriptive name of the binding for identification and management purposes.
The MAC address of the PC or device that is bound to the IP address.
The IP address of the PC or device that is bound to the MAC address.
To log the dropped packets, select Enable from the drop-down list. The default setting
is Disable.
IPv4 Firewall Protection
Configure Logging, Alerts, and
150