Content Filtering; Source Mac Filtering - NETGEAR FVS318N Reference Manual

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
• WAN users. You can specify which Internet locations are covered by an outbound rule,
based on their IP address:
- Any. The rule applies to all Internet IP address.
- Single address. The rule applies to a single Internet IP address.
- Address range. The rule applies to a range of Internet IP addresses.
• Schedule. You can configure three different schedules to specify when a rule is applied.
Once a schedule is configured, it affects all rules that use this schedule. You specify the
days of the week and time of day for each schedule. For more information, see
Schedule to Block or Allow Specific Traffic
• QoS profile. You can apply QoS profiles to outbound rules to regulate the priority of
traffic. For information about QoS profiles, see
on page 141.
• Bandwidth profile. You can define bandwidth profiles and then apply them to outbound
rules to limit traffic. For information about how to define bandwidth profiles, see
Bandwidth Profiles

Content Filtering

If you want to reduce traffic by preventing access to certain sites on the Internet, you can use
the wireless VPN firewall's content-filtering feature. By default, this feature is disabled; all
requested traffic from any website is allowed with the exception of web content categories
that are mentioned in Configure Content Filtering
The wireless VPN firewall provides the following methods to filter web content in order to
reduce traffic:
• Keyword blocking. You can specify words that, should they appear in the website name
(URL) or newsgroup name, cause that site or newsgroup to be blocked by the wireless
VPN firewall.
• Web object blocking. You can block the following web component types: embedded
objects (ActiveX and Java), proxies, and cookies.
To further narrow down the content filtering, you can configure groups to which the
content-filtering rules apply and trusted domains for which the content-filtering rules do not
apply.

Source MAC Filtering

If you want to reduce outgoing traffic by preventing Internet access by certain PCs on the
LAN, you can use the source MAC filtering feature to drop the traffic received from the PCs
with the specified MAC addresses. By default, this feature is disabled; all traffic received from
PCs with any MAC address is allowed. See
procedure on how to use this feature.
on page 139.
Enable Source MAC Filtering
Network and System Management
272
on page 146.
Preconfigured Quality of Service Profiles
on page 142.
Set a
Create
on page 147 for the