Configure User Accounts - NETGEAR FVS318N Reference Manual

Edit Groups
For groups that were automatically created when you created a domain, you can modify only
the idle time-out settings but not the group name or associated domain.
For groups that you created on the Add Groups screen, you can modify the domain and the
idle time-out settings but not the group name.

To edit a VPN group:
1. Select Users > Groups. The Groups screen displays (see
2. In the Action column of the List of Groups table, click the Edit table button for the group that
you want to edit. The Edit Groups screen displays. This screen is identical to the Add
Groups screen.
3. Modify the settings as explained in the previous table.
4. Click Apply to save your changes. The modified group is displayed in the List of Groups
table.

Configure User Accounts

When you create a user account, you need to assign the user to a user group. When you
create a group, you need to assign the group to a domain that specifies the authentication
method. Therefore, you should first create any domains, then groups, and then user
accounts.
Note: IPSec VPN users always belong to the default domain (geardomain)
and default group (also geardomain) and do not need to be assigned
a user account.
There are two default user accounts:
• A user with the name admin and the password password. This is a user who has
read/write access, is associated with the domain geardomain, and is denied login from
the WAN interface by default. The user name is appended by an asterisk. You cannot
delete this user account.
• A user with the name guest and the password password. This is a user who has
read-only access, is associated with the domain geardomain, and is denied login from the
WAN interface by default. The user name is appended by an asterisk. You cannot delete
this user account.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Manage Users, Authentication, and VPN Certificates
Figure 147
254
on page 252).