Configure Usb Storage Advanced Settings - NETGEAR MVBR1210C User Manual

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
Note: You need to click Apply for your changes to take effect.

Configure USB Storage Advanced Settings

To configure advanced USB settings, from the router menu, under USB, select Advanced
Settings. The USB Storage (Advanced Settings) screen displays:
You can use this screen to specify access to the USB storage device. The following table
explains the fields and buttons in the USB Storage (Advanced Settings) screen.
Table 9. USB Storage (Advanced Settings)
Fields
Network Device Name
Workgroup
Access Method Network
Connection
HTTP
HTTP (via
Internet)
FTP
FTP (via
Internet)
Description
The default is readyshare. This is the name used to access the USB device
connected to the router from your computer.
If you are using a Windows workgroup rather than a domain, the workgroup
name is displayed here.
Enabled by default, this allows all users on the LAN to have access to the
USB drive.
Disabled by default. If you enable this setting, you can type
http://kbserver.netgear.com/products/MVBR1210C-1BMCNS.asp
access the USB drive.
Disabled by default. If you enable this setting, remote users can type
http://kbserver.netgear.com/products/MVBR1210C-1BMCNS.asp
access the USB drive over the Internet.
Disabled by default.
Disabled by default. If you enable this setting, remote users can access the
USB drive through FTP over the Internet.
USB Storage
46
to
to