NETGEAR FVS318N Reference Manual page 303

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 172.
The following table explains the fields of the Router Statistics screen.
To change the poll interval period, enter a new value (in seconds) in the Poll Interval field,
and then click Set interval. To stop polling, click Stop.
Table 76. Router Statistics screen information
Item
System up Time. The period since the last time that the wireless VPN firewall was started up.
Router Statistics
For the broadband (WAN) interface and for all LAN interfaces combined, the following statistics are
displayed:
Tx Pkts
Rx Pxts
Collisions
Tx B/s
Rx B/s
Up Time
Detailed Status Screen
To view the Detailed Status screen, select Monitoring > System Status > Detailed Status.
The Detailed Status screen displays:
Description
The number of packets transmitted on the port in bytes.
The number of packets received on the port in bytes.
The number of signal collisions that have occurred on the port. A collision occurs
when the port attempts to send data at the same time as a port on the other router or
computer that is connected to this port.
The number of bytes transmitted per second on the port.
The number of bytes received per second on the port.
The period that the port has been active since it was restarted.
Monitor System Access and Performance
303