Yamaha FJR1300A(D) Service Manual page 584

• If the T/C terminal is not short-circuited to the ground, check the internal circuit of the meter assem-
bly.
Turn the main switch to "OFF".
Disconnect the ABS ECU coupler and check that the ABS warning light comes on when the main
switch is turned to "ON".
If the ABS warning light is flashes, the internal circuit of the meter assembly is defective. Replace
the meter assembly.
If the ABS warning light is on, the ABS ECU is defective. Replace the hydraulic unit assembly.
EAS1MC1004
[A-4] THE ABS WARNING LIGHT COME ON
Turn the main switch to "OFF".
Remove front cowling inner panel and right upper inner panel to access the ABS test coupler "1". Re-
move the protective cap from the ABS test coupler, and then connect the test coupler adapter "2" to the
coupler. The T/C terminal (sky blue) is now grounded.
Turn the main switch to "ON", and then check the multi-function meter right display.
1. A fault code number "1" is not displayed in the multi-function meter right display. [B-1]
2. A fault code number "1" is displayed in the multi-function meter right display. (For example, fault code
No. ABS_16) [B-3]
ABS (ANTI-LOCK BRAKE SYSTEM)
1
8-135
1
2
DIAG
GEAR
N
1
ABS_16