Yamaha FJR1300A(D) Service Manual page 50

2. Push the menu switch "MENU". The grip
warmer setting display will be shown and
"High" will flash in the display.
Grip Warmer
Hi g h
Middle
Low
3. Push the menu switch "MENU". The temper-
ature level for the high setting will start flash-
ing.
Use the select switch to set the temperature
level, and then push the menu switch
"MENU". "High" will start flashing.
Grip Warmer
Hi g h
Middle
Low
4. Use the select switch to highlight "Middle" or
"Low", and then change the setting using the
same procedure that was used for the high
setting.
5. When you are finished changing the settings,
use the select switch to highlight " ", and
then push the menu switch "MENU" to return
to the setting mode menu.
Grip Warmer
Hi g h
Middle
Low
TIP
The setting can be set to 10 temperature levels.
10
5
1
10
5
1
10
5
1
1-41
Resetting the maintenance counters
1. Use the select switch to highlight "Mainte-
nance".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the menu switch "MENU", and then
push the "RESET" button to select the item to
reset.
Maintenance
OIL
FREE-1
FREE-2
3. While the selected item is flashing, push the
"RESET" button for at least 2 seconds.
4. Push the menu switch "MENU" to return to
the setting mode menu.
Checking and resetting TIME-2 and TIME-3
1. Use the select switch to highlight "Time Trip".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
FEATURES
km
20
km
10
km
10