Yamaha FJR1300A(D) Service Manual page 133

1. License plate light lead
2. Tail/brake light assembly lead
3. Seat lock cable
A. Route the tail/brake light assembly lead and
license plate light lead between the rib and the U-
lock holder on the rear fender, making sure that the
leads are not routed on top of the holder.
B. Fasten the tail/brake light assembly lead and
license plate light lead with the holder.
C. Route the tail/brake light assembly lead and
license plate light lead between the ribs on the rear
fender.
2-62
CABLE ROUTING