Yamaha FJR1300A(D) Service Manual page 51

2. Push the menu switch "MENU" to display
"TIME-2" and "TIME-3". To reset a time trip,
push the "RESET" button to select the item to
reset.
Time Trip
TIME-2
TIME-3
3. While the selected item is flashing, push the
"RESET" button for at least 2 seconds.
4. Push the menu switch "MENU" to return to
the setting mode menu.
Selecting the units
1. Use the select switch to highlight "Unit".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the menu switch "MENU". The unit set-
ting display will be shown and "km or mile"
(for the UK only) or "km/L or L/100km" (ex-
cept for the UK) will flash in the display.
Unit
Km or mile
km/L or L/100km
TIP
• For the UK: Continue with the following steps.
• Except for the UK: Skip steps 3-5.
0:07
0:07
km
km/L
3. Push the menu switch "MENU". "km" or "mile"
will flash in the display.
4. Use the select switch to select "km" or "mile",
and then push the menu switch "MENU".
TIP
When "km" is selected, "L/100km" or "km/L" can
be set as the fuel consumption units. To set the
fuel consumption units, proceed as follows. If
"mile" was selected, skip steps 5 and 6.
5. Use the select switch to select "km/L or
L/100km".
6. Push the menu switch "MENU", use the se-
lect switch to select "L/100km" or "km/L", and
then push the menu switch "MENU" again.
7. Use the select switch to highlight " ", and
then push the menu switch "MENU" to return
to the setting mode menu.
Selecting the display items
1. Use the select switch to highlight "Display".
1-42
FEATURES
Unit
Km or mile
km
km/L or L/100km
km/L
Unit
Km or mile
km
km/L or L/100km
km/L
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock