Changing And Deleting Permit Id No; Setting Send Restriction - Kyocera ECOSYS M6530cdn Operation Manual

Fax Settings > Transmission Restriction

Changing and Deleting Permit ID No.

1
2

Setting Send Restriction

Restrict the other parties to which you send originals only to the ones registered in Permit FAX No. and Permit ID No. as
well as the ones registered in the Address Book. To change the sending restriction, follow the steps below.
1
2
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[TX/RX Restrict.] > [OK] key > [▲] [▼] key > [Permit ID List] > [OK] key
Change/Delete.
Changing
1
Select the Permit ID No. to be changed.
2
Select the [OK] key.
3
Use the numeric keys to reenter the Permit ID number.
NOTE
For the procedure for entering a number, refer to the following:
Registering Permit ID No. (page 8-13)
4
Select the [OK] key.
Deleting
1
Select the Permit ID No. to be deleted.
2
[Menu] > [▲] [▼] key > [Delete] > [OK] key > [Yes]
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[TX/RX Restrict.] > [OK] key > [▲] [▼] key > [TX Restriction] > [OK] key
Configure the function.
[Off] or [Permit+Addr Book] > [OK] key
To restrict the other parties to which you send originals only to the ones registered in Permit
FAX No. and Permit ID No. as well as the ones registered in the Address Book, select [Permit
+ Addr Book].
8-14