Kyocera ECOSYS M6530cdn Operation Manual page 158

Fax Settings > Account Management
Restriction of use function
When you have enabled job accounting, you need to enter an Account ID when performing the
following operations.
• Normal transmission
• Delayed transmission
• Broadcast transmission
• Sub address transmission
• Output from Sub address Box
• Encrypted transmission
• Manual send when dialed from this machine to the receiving system
• Polling reception
• Sending Faxes from PC
When job accounting has been enabled, batch transmission function works only for
communication to be performed for the same Account ID. The communication to be performed
with a different Account ID is not conducted as a batch transmission.
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However,
when Account Name Used is ON, the Account Name is printed.
8-19