Horizontal Or Vertical Terminations - Regency PG33-NG Owners & Installation

Hide thumbs

Table Of Contents

Table of Contents

The Simpson Dura-Flue Direct Flue System offers

a complete line of component parts for installation

of both horizontal and vertical installations. Many

items are offered in decorative black, as well as

galvanized finish. We recommend using the galva-

nized finish for installation with the PG33.

The minimum components required for a basic

horizontal termination are:

AstroCap Horizontal Termination Cap

Elbow

Flue Adaptor

Wall Thimble

Length of pipe to suit wall thickness (see

chart)

For siding other than vinyl furring strips may be

used, instead of the vinyl siding standoff, to cre-

ate a level surface to mount the flue terminal. The

Terminal must not be recessed into siding.

If a Vinyl Siding Standoff is required (it must be

used with vinyl siding), measure to outside surface

of wall without siding and add 2 inches.

The Regency AstroCap

tions using FPI flueing systems as well as Simpson

Dura-Vent® and Direct Vent GS.

Regency

, and Regency AstroCap

proprietary trademarks of FPI Fireplace Products

International Ltd.

Dura-Vent® and Direct Vent GS are registered

and/or proprietary trademarks of Simpson Dura-

Vent Co. Inc.

Wherever necessary due to external

location of cap, the AstroCap can be

replaced with the FPI Riser Vent Ter-

mination Cap or the Dura-Vent Snorkel

Termination Cap.

Regency PG33 Gas Inbuilt

SIMPSON DURA-FLUE FLUEING