Paper Settings; Specifying A Paper Size - Ricoh SP 3600dn User Manual

2. Loading Paper

Paper Settings

This section explains how to specify paper size and type using the control panel.
• When [Tray Setting Priority] is set to [Machine Setting(s)], the paper settings configured using the
printer's control panel have priority over the settings specified in the printer driver or commands.
For details, see "System", Operating Instructions.

Specifying a Paper Size

• To use the paper size and feed direction other than those indicated on the paper size dial, set the
dial to " ", and set the paper size using the control panel.
• To use custom size paper, be sure to specify the paper size using the control panel and the printer
driver.
• The printer cannot print on custom size paper if the application does not support custom size paper.
Specifying Standard Size Paper
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1. Select [Tray Paper Settings]
2. Select [Printer Bypass Paper Size] or [Paper Size: (tray name)]
3. Select the size of the paper set in the specified tray
• For details about the available paper size, see page 26 "Paper Size Specifications".
Specifying Custom Size Paper
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1. Select [Tray Paper Settings]
2. Select [Printer Bypass Paper Size] or [Paper Size: (tray name)]
3. Select [Custom Size]
4. Enter the horizontal value
5. Enter the vertical value
48
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]