Ricoh SP 3600dn User Manual page 65

Problem
Images are cut off, or excess is
printed.
Photo images are grainy.
A solid line is printed as a
dashed line or appears blurred.
Fine lines are fuzzy with
inconsistent thickness or color,
or do not appear.
Images appear only partially
colored.
Cause
You may be using paper smaller
than the size selected in the
application.
Some applications print at a
lower resolution.
Dither patterns do not match.
Super fine lines have been
specified in the application.
The paper is damp.
Other Printing Problems
Solution
Use the same size paper as that
selected in the application. If
you cannot load paper of the
correct size, use the reduction
function to reduce the image,
and then print. For details about
the reduction function, see the
printer driver Help.
Use the application's or printer
driver's settings to specify a
higher resolution. For details
about printer driver's settings,
see the printer driver Help.
PostScript 3:
Change the dithering settings on
the printer driver. For details
about the dithering settings, see
the printer driver Help.
PostScript 3:
Change the dithering settings on
the printer driver. For details
about the dithering settings, see
the printer driver Help.
If the problem continues after
you change the dithering
settings, use the settings of the
application in which the image
was created to change the color
and thickness of the lines.
Use paper that has been stored
in the recommended
temperature and humidity
conditions. For details about the
proper way to store paper, see
page 31 "Paper Precautions".
63