Central Station Receiver 1 Account Number; Central Station Receiver 1 Format - NAPCO Gemini GEM-X255 Programming Instructions Manual

!
Page 8
CENTRAL STATION
ACCOUNT #(____ )
(Direct Entry)
SEE WI FOR INFO
RCVR FORMAT (0)
(Direct Entry)
DATA CS RECEIVER 1 FORMAT
ENTRY
blank(•) Ademco Slow, Silent Knight Slow
1 Sescoa, Vertex, DCI, Franklin Fast
2 Radionics Fast
3 Silent Knight Fast
4 Radionics, DCI, Franklin Slow
5 Universal High Speed
8 Radionics BFSK
X
GEM-X255 Programming Instructions

Central Station Receiver 1 Account Number

Enter an account number of up to four digits. Use number buttons
through for digits 1–9. NOTE: Press the
9
press the
G 0
for letters B–F, respectively. Press
G 5
( ) button to proceed.
E
NOTE: Central Station Receiver 2 and 3 Account Numbers can only be
entered in Direct Address Programming. See CS Reporting Options.

Central Station Receiver 1 Format

From the table below, enter the central station's receiver format. Use
number buttons
1
a zero. and press the
through
G 1
J
Press to save. Press NEXT (
DATA CS RECEIVER 1 FORMAT
ENTRY
9 FBI 4/3/1
0 Radionics Modem 2
B SIA
C Ademco Point ID
D Ademco Express
E Pager
0
buttons for a blank space (•).
through . NOTE: Press the
9
buttons for a blank space (•). Press
G 0
for letters B–E, respectively.
G 4
) button to proceed.
E
NOTE: Modem IIe is available only in Direct
Address Programming.
Receiver 2 and 3 Formats can only be entered
in Direct Address Programming. See CS
Receiver Options.
L
NAPCO Security Systems
WI1092B 9/02
1
button for a zero and
through
G 1
J
to save . Press NEXT
button for
0
Central Station