Zone Descriptions - NAPCO Gemini GEM-X255 Programming Instructions Manual

WI1092B 9/02

ZONE DESCRIPTIONS

001-_____________
________________
Enter an identifying description for each
zone. Buttons and
1 2
position; buttons and
3 6
numbers, letters, punctuation marks, etc.
!
Position the cursor over the displayed
Zone Number (i.e., "01") using buttons
and .
1 2
!
Change the Zone Number using buttons
and .
3 6
!
Position the cursor over the first
character of the description field.
Advancing the cursor between
characters, program a description of up
to two lines for the new zone using
buttons and
3 6
J
!
Press the button to save. Advance to the next zone as in Steps 1 and 2 above and repeat this procedure until all zones have
been programmed.
NOTE: All 255 Zone Descriptions may be keypad programmed in both User and Dealer program modes.
L
NAPCO Security Systems
To Program Zone Descriptions
1. Set the Cursor Position using
buttons
2. Select characters for zone
description using buttons
set the cursor
3
scroll
4. Press the
each descriptor.
NOTE: Press
.
and .
1 2
and .
6
J
button to save
G 0 button to clear character at cursor.
To continue press E or F button.
Programming Zone Descriptions
X
GEM-X255 Programming Instructions
!
Page 51