NAPCO Gemini GEM-X255 Programming Instructions Manual page 19

WI1092B 9/02
SYSTEM DELAYS & TIMEOUTS (ADDRESS 0000- 0002, 2402, 2406, 2414 & 3902)
ADDRESS 0000
EXIT
ENTRY
DELAY
LEFT RIGHT DELAY 1
(sec.)
(sec.)
[Default = 3C]
DATA ENTRIES DELAY/
TIMEOUT
LEFT RIGHT
blank (•) blank (•) 0 sec.
blank (•) F 15 sec.
1 E
30 sec.
2 D
45 sec.
3 C 60 sec.
5 0 90 sec.
7 8
120 sec.
F F
255 sec.
PROGRAMMING TIMEOUTS: Either use the tables provide or calculate your own timeout using the steps indicated.
WARNING: Timers have uncertainty of +/-1sec, so a "time" of 1 second may actually timeout IMMEDIATELY.
SYSTEM DELAYS & TIMEOUTS (ADDRESS 2407, 2408 & 4088)
ADDRESS 2407
CHIME
TIMEOUT
LEFT RIGHT
(¼sec.)
[Default = blank (•) 2]
CHIME TIMEOUT OPTIONS
DATA ENTRIES
TIMEOUT
LEFT RIGHT
blank (•) blank (•) 0 ¼sec. = 0 sec.
blank (•) 2
2 ¼sec. = ½ sec.
blank (•) 3 3 ¼sec. = ¾ sec.
blank (•) 4 4 ¼sec. = 1 sec.
blank (•) 5
5 ¼sec. = 1.25 sec.
blank (•) 6
6 ¼sec. = 1.5 sec.
blank (•) 7
7 ¼sec. = 1.75 sec.
blank (•) 8 8 ¼sec. = 2 sec.
F F
255 ¼sec. = 63.25 sec.
!
1. Select delay/timeout from the table shown.
!
2. Enter in corresponding address locations above (left and right digits).
!
3. For a desired delay/timeout not listed do the following:
A. Choose a desired delay/timeout , ex: 20. Note: For Sensor Watch only divide it by 10, ex: 20/10 = 2
B. Divide it by 16
L
NAPCO Security Systems
ADDRESS 0001
ENTRY
LEFT RIGHT DELAY 2
(sec.)
[Default = 1E]
!
1. Select delay/timeout (0-255 sec.) from the table shown.
!
2. Enter in corresponding address locations above (left and right digits).
!
3. For a desired delay/timeout not listed do the following:
A. Choose a desired delay/timeout, ex: 20 sec.
B. Divide it by 16
EXIT/ENTRY DELAYS: Apply only to zones programmed with the following
options "Entry/Exit 1, Entry/Exit 2, Exit/Entry Follower". For UL Installations, the maximum exit
delay is 60 seconds and the maximum entry delay is 45 seconds.
AC Fail
Report
Delay
(min.)
[Default = blank (•) blank (•)]
AC FAIL REPORT DELAY OPTIONS
DATA ENTRIES
LEFT RIGHT
blank (•) blank (•)
blank (•) 1
blank (•) 2
blank (•) 3
blank (•) 4
blank (•) 5
blank (•) 6
blank (•) 7
F F
1 Quotient Left Digit
16 20
16
4 Remainder Right Digit
ADDRESS 0002
Aux. Output
Access
LEFT RIGHT
Control
Timeout
(sec.)
[Default = 1 E]
1 Quotient Left Digit
16 20
16
4 Remainder Right Digit
ADDRESS 2408
LEFT RIGHT
DELAY
0 min.
10 min.
20 min.
30 min.
40 min.
50 min.
60 min.
70 min.
2550 min. = 42 Hr., 30 min.
X
GEM-X255 Programming Instructions
ADDRESS 2402 ADDRESS 2406
ABORT
DELAY
LEFT RIGHT LEFT
(sec.)
[Default = blank (•) blank (•)]
ADDRESS 2414
Telephone
Line Test
LEFT
Delay
(sec.)
[Default = blank (•) blank (•)]
ADDRESS 3902
CS Telco
3 Report
LEFT
Delay
(sec.)
[Default = blank (•) blank (•)]
ADDRESS 4088
Sensor
Watch
LEFT RIGHT
Delay
(Hr.)
[Default = blank (•) blank (•)]
SENSOR WATCH OPTIONS
DATA ENTRIES
DELAY
LEFT RIGHT
blank (•) blank (•) 0 Hr.
blank (•) 1 1 Hr.
blank (•) 2 2 Hr.
blank (•) 3
3 Hr.
blank (•) 4
4 Hr.
blank (•) 5
5 Hr.
blank (•) 6 6 Hr.
blank (•) 7
7 Hr.
F F 255 Hr.
!
Page 19
RIGHT
RIGHT
RIGHT