Step 10: Install Other Pcbs Into The Cabinet(S) - Toshiba STRATA CTX100 Installation And Maintenance Manual

Step 10: Install Other PCBs into the Cabinet(s)

1. Each PCB must be configured for the applicable hardware options prior to installation of the
PCB to the CTX100 cabinets.
Configuration instructions for individual PCBs are in
7 – MDF PCB
Chapter 9 – Peripheral
2. Use the PCB placement guide in
page 1-26 to determine which PCB slot can be used for each PCB type.
3. Slide the PCB Slot Locking Bar to
the right, then insert each of the
PCBs; push the PCBs firmly toward
the motherboard, making sure that
the connectors are secured (see
Figure 2-18). Lightly tug on each
PCB to make sure that it's installed
securely.
4. After all the PCBs are installed, slide
the PCB Slot Locking Bar to the left
to lock the PCBs into place.
5. Configure the PCBs for software
options through programming. Refer
to the Strata CTX Programming
Manual for more detailed
programming instructions.
The Base and Expansion cabinets
Note
have four universal PCB slots
each which can accept the same
universal PCBs as the CTX670.
CTX100-only components are
shown in Table
Table 2-2 CTX100 Cabinet and Processor Components
PCB
Base Cabinet with power supply without
CHSUB112
battery charger.
Expansion Cabinet with power supply
CHSUE112
without battery charger.
APSU112 Power Supply for CTX100.
System Processor PCB. (Optional PCB
attachments include: modem. Ethernet
ACTU
10BaseT, DTMF Receiver/Busy Tone
Detector and Serial Interface Unit.
ARCS
DTMF Receiver and ABR Circuits.
(Optional)
AETS
Ethernet LAN (10 BaseT)
(Optional)
Strata CTX I&M 10/02
Wiring. Configuration instructions for external hardware options are provided in
Installation.
"Worksheet 5: Strata CTX100 Cabinet Slot Configuration" on
2-2.
Provides
Chapter 4 – PCB Installation
Figure 2-18 PCB Slot Locking Bar
Comments
Provides 4 universal slots.
Provides 4 universal slots.
Spare power supply.
One per system. Supports 8 PCB
slots (4 slots in the Base Cabinet +
4 more in the Expansion Cabinet).
One per system. Provides 16
DTMF and 16 ABR circuits.
One per system. Provides 10Mbps
LAN by one RJ45 for WinAdmin.
Strata CTX100 Installation
Installing the CTX100 Cabinet
and Chapter
PCB Slot
Locking Bar
6005
Installs On
Base or
Expansion
Cabinet
ACTU
ACTU
2-21