Dkt2104-Ct; Cordless Telephone Installation (Dkt2004-Ct, Dkt2104-Ct) - Toshiba STRATA CTX100 Installation And Maintenance Manual

DKT2104-CT

The DKT2104-CT works with Strata CTX telephone
systems and provides you with reliability, long life,
and outstanding performance. Some features are:
900 MHz Digital Narrow Band technology
•
30 Simultaneous channels
•
LCD that wraps using 2 lines, 32 characters
•
Four displayed operation modes, including
•
Message Waiting (MW)
Hold, MSG (LCD icon), Cnf/Trn, Mute buttons
•
Headset jack (headset optional)
•
Five handset ring modes, including a vibration mode
•
Simultaneous charging of handset and spare batteries
•
Wall-mount or desktop unit with wall-mount plate, and belt clip included.
•

Cordless Telephone Installation (DKT2004-CT, DKT2104-CT)

Your telephone system must be programmed for Auto Preference for your TALK
Important!
button to work. If there is a shared digital telephone, you receive internal system
dial tone automatically after picking up the handset of your deskset. For example, in
a Strata CTX system, Program 32 must have a setting other than "00." It is best to
set Auto Line Preference to access Intercom dial tone.
➤
To install the cordless telephone
1. Select a location for your cordless digital telephone. Avoid excessive heat or humidity. For wall
mounting, refer to the following section.
2. Place the cordless digital telephone's base unit on a desk or tabletop near a standard 120VAC
outlet and within reach of the digital telephone line connection to your Strata CTX system.
3. Keep the base and handset away from electrical noise (motors, fluorescent lighting, etc.).
Important! Place the cordless telephone to the right of the DKT. If placed on the left of the
DKT, the cordless antenna will pick up a tone due to its close proximity to the DKT
speaker and electronic parts.
Strata CTX I&M 10/02
Station Apparatus
Cordless Digital Telephones
8-31