Cordless Telephone Connectors - Toshiba STRATA CTX100 Installation And Maintenance Manual

➤
To connect the cordless telephone using the AC adapter
1. Plug the AC adapter cord into the AC adapter input jack on the base unit (see
Use only the AC adapter supplied with your cordless digital telephone.
CAUTION!
AC Adapter
Figure 8-28 Cordless Telephone AC Adapter

Cordless Telephone Connectors

2. Plug the AC adapter into a standard 120VAC wall
outlet.
3. Route the power cord where it is not a trip hazard,
and where it will not become chafed and create a
fire or electrical hazard.
4. Wrap the power cord around the notch on the
bottom of the base unit (see
5. Check to see that the power LED is on, indicating
the telephone has power.
6. Before using your cordless digital telephone, be
sure to raise the antenna to the vertical position.
Important! If the cordless telephone is connected to a DKT3000-series telephone, be sure to
program the DKT3000 telephone to act as a DKT2000; otherwise, the LCD readouts
will not fit on the cordless telephone LCD. See
8-17
Strata CTX I&M 10/02
Figure 8-29).
for instructions.
Modular
Cords
Line Out
to DKT
1175
Figure 8-29 Line Out Cord
"DKT2000 Mode On/Off" on page
Station Apparatus
Cordless Digital Telephones
Figure 8-28).
5232 Line in to Digital
Telephone Circuit
(BDKU or RDSU)
See Chapter 7 –
MDF PCB Wiring
8-33