5
Boiler installation
5.8.4
Fitting cable strain relief
Secure all cable runs with cable ties (included with the
control):
V Insert the cable ties together with the cable from the
top into the slots in the frame (step 1).
V Slide the cable ties downward (step 2).
V Push against the ties (step 3).
V Flip the toggle up (step 4).
5.9
Install the back boiler cover
V Place the programming unit cover [1] in position and
secure with screws.
V Fit the rear boiler top panel [2].
32
Logano GB125 BE US/CA - Technical specifications are subject to change without prior notice.
Fig. 30 Securing cables with cable ties
Fig. 31 Fitting the rear boiler cover
1
Programming unit cover
2
Rear boiler cover
7 747 019 141-25.1RS