Product Description; Intended Use - Buderus Logano GB125/22 BE Installation And Service Instructions Manual

2

Product description

2 Product description
This installation and maintenance manual contains impor-
tant information for the safe and correct installation, initial
start-up and maintenance of this boiler.
The Logano GB125 BE oil-fired condensing boiler is gen-
erally referred to below simply as the boiler.
These installation and servicing instructions are intended
for trained and certified heating contractors, who – as a
result of their technical training and experience – are
skilled in dealing with heating systems and DHW installa-
tions.
This boiler must be installed with one of the Buderus sup-
plied concentric heating systems.
– Concentric direct vent side wall kit
– Concentric vertical kit
– Concentric masonry chimney kit
This boiler produces significant amounts of acidic flue gas
condensate while in operation. Condensate may cause
damage to sewer pipes and septic systems, and disposal
may be subject to local regulations. In the absence of
such regulations Buderus recommends a condensate
neutralization kit.
The boiler must draw all combustion air from the outside.
2.1

Intended use

The boiler is designed for heating central heating system
water and indirect heating of domestic hot water (e.g. in a
hot water tank), for instance in single family homes or multi
family buildings.
6 Logano GB125 BE US/CA - Technical specifications are subject to change without prior notice.