Mp Assembly - Xerox WorkCentre Pro 412 Service Manual

Disassembly and Reassembly

6-1-14 MP Assembly

1. Before you remove the MP Assembly, you
should remove:
- Rear Cover (see page 6-2)
- Shield Main Upper
- Side Cover Assembly (see page 6-10)
2. Unplug the two connectors.
3. Remove the one screw and take out the
Dummy Cover.
6-20
4. Remove the three screws.
5. Release the SMPS fit. Pull the MP Assembly
Dummy Cover
3/03
upward and remove it.
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i
MP Ass'y