Drive Assembly - Xerox WorkCentre Pro 412 Service Manual

Disassembly and Reassembly

6-2-12 Drive Assembly

1. Before you remove the Drive Assembly, you
should remove:
- Rear Cover (see page 6-26)
- Shield Main Upper
2. Unplug two connectors. (Main Motor: 9pin,
Duplex Solenoid: 2pin)
3. Remove one screw and take out the Fan and
Dust Fan.
6-44
4. Remove five screws and take out the Drive
Assembly.
3/03 WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i