Xerox WorkCentre Pro 412 Service Manual page 178

Maintenance & Troubleshooting
NOTE: Always perform the memory clear after replacing the main board. Otherwise, the system may not
operate properly.
Answer On CNG
The function is to control the CNG TONE cognition times for entering receiving mode from the AUTO
MODE or ANS/FAX MODE
Clear Count
This function erases information of history such as replacement times of Developing part and OPC drum,
total printing pages, scan times, etc.
• The items are in the below section of the System Data List, printed at TECH MODE.
• Password: 1934
• Current Drum Page Count cannot be erased.
It is possible to erase at NEW DRUM function (USER MODE ⇒ MINTENANCE ⇒ NEW DRUM)
FIRMWARE VERSION
ENGINE VERSION
EMULATION VERSION
TOTAL PAGE COUNTS
CRU PRINTS
REPLACED TONER COUNTS
REPLACED DRUM COUNTS
CURRENT DRUM COUNTS
PLATEN SCAN PAGE COUNTS
ADF SCAN PAGE COUNTS
7-8
: 1.00
: 1.00
: PCL6 2.32 07-11-2001
PCL5e 1.48 07-19-2001
: 123
: 123
: 1
: 1
: 112
: 23
: 10
< SYSTEM DATA LIST >
3/03 WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i