Ope Assembly - Xerox WorkCentre Pro 412 Service Manual

6-1-4 OPE Assembly

1. Before you remove the OPE Assembly, you
should remove:
- Rear Cover (see page 6-2)
- Scanner Assembly (see page 6-3)
2. Remove ten screws securing the OPE PBA
and the LCD Module from the OPE Cover.
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i
3. Remove the contact rubbers from the unit.
4. Remove the key pad from the unit.
3/03
Disassembly and Reassembly
6-9