PCL 6 - Fixes Included
Various improvements to the handling of PCL6 documents.
Upgrading Machines in the Field
Upgrade the machine to version 1.08 firmware.
The upgrade can be performed using a PC or laptop running Windows 95/98/NT/2000/ME/XP using either
the USB or Parallel port.
A USB or Parallel cable is required to upgrade the machine and the computer must be running Control-
Centre software that was supplied with it.
The Firmware can be used on any previous versions shown on the machine.
After upgrading the product, the following firmware versions will be displayed by printing out a System
Data List, refer to Table 1.
Firmware
1.08
1.07
Firmware Location:
Docushare
http://xww.odpg.world.xerox.com:99/View/Collection-38995
Website
Go to www.xerox.com and search under the WCP412 for the drivers
Tools
Firmware files
Software
Hardware
TAG No.
Not applicable
Strategy
N/A
Software Version:
Any
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i
Table 1 System Data List
Engine
PCL6 3.03 12-11-2001
PCL5 1.48 08-10-2001
emul0108.hd (PCL Emulation)
k9wx0108.hd (Main UI AND Engine)
ControlCentre (installed)
USB Cable or Parallel Cable
Maintenance & Troubleshooting
Emulation
3/03
7-47