Exit Assembly - Xerox WorkCentre Pro 412 Service Manual

6-1-7 Exit Assembly

1. Before you remove exit assembly, you should
remove:
- Rear cover (see page 6-2).
- Scanner assembly (see page 6-3).
- Side cover assembly (see page 6-10).
2. Remove three screws and unlatch the exit
assembly, as shown below.
3. Pull the exit assembly and remove it.
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i
3/03
Disassembly and Reassembly
6-13