Netopia R5000 User Reference Manual page 79

The PPP options screen for a switched interface appears as follows:
Data Compression...
Send Authentication...
Send User Name:
Send Password:
Receive User Name:
Receive Password:
Maximum Packet Size:
In this Screen you will configure the PPP/MP specific connection params.
You can accept the defaults, or change them if you wish. You can also specify user name and password for
both outgoing and incoming calls. the Send User Name/Password parameters are used to specify your
identity when dialing out to a remote location. The Receive User Name/Password parameters are used
when receiving dial-in clients such as via RAS configuration.
Return to the Add Connection Profile screen by pressing Escape.
Datalink (PPP/MP) Options
Standard LZS
PAP
1500
WAN and System Configuration 8-17