Disconnect Telnet Console Session; Chapter 14 — Utilities And Diagnostics - Netopia R5000 User Reference Manual

A number of utilities and tests are available for system diagnostic and control purposes.
This section covers the following topics:
"Ping" on page 14-2
"Trace Route" on page 14-5
"Telnet client" on page 14-6
"Disconnect Telnet console session" on page 14-7
"Factory defaults" on page 14-7
"Transferring configuration and firmware files with TFTP" on page 14-8
"Transferring configuration and firmware files with XMODEM" on page 14-10
"Restarting the system" on page 14-13
Note: These utilities and tests are accessible only through the console-based management screens. See
Chapter 6, "Console-Based Management,"
screens.
You access the Utilities & Diagnostics screens from the Main Menu.
for information on accessing the console-based management
Utilities & Diagnostics
Ping...
Trace Route...
Telnet...

Disconnect Telnet Console Session...

Trivial File Transfer Protocol (TFTP)...
X-Modem File Transfer...
Revert to Factory Defaults...
Restart System...
Utilities and Diagnostics 14-1