Netopia R5000 User Reference Manual page 78

8-16 User's Reference Guide
6. Toggle or enter any IPX Parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information, see
7. Select Datalink Options and press Return.
The Datalink Options screen appears. The Datalink Options screen will vary depending on the data link
encapsulation method you are using.
The Frame Relay options screen appears as follows:
Auto-Detect DLCIs:
Multicast DLCI Number:
Configure Frame Relay-specific parameters of your Connection Profile here.
You can toggle Auto-Detect DLCIs to Yes (the default) or No for this profile.
You can enter the DLCI Number you want to multicast, if any.
"IPX Setup" on page
Datalink (Frame Relay) Options
10-1.
Yes
0