Netopia R5000 User Reference Manual page 195

The Move Input/Output Filter permits reordering of rules in a filter set.
+#----Source IP Addr---Dest IP Addr-----Proto-Src.Port-D.Port--On?-Fwd-+
+----------------------------------------------------------------------+
| 1
| 2
| 3
| 4
| 5
|
|
|
|
|
|
|
|
|
|
|
+----------------------------------------------------------------------+
Arrows move filter. RETURN/ENTER to accept new filter location. ESC aborts.
All operations are done from a single popup.
In the Display/Change Filter Set screen, select Move Input Filter (or Move Output Filter). A selection mode
popup appears. In this mode you scroll to the rule you want to move and press Return on a rule to select it
for moving.
The help text tells you what is expected.
After pressing Return you are in Move mode. Arrow keys move the selected rule up or down. When you
press Return again the rule is put in the new location permanently and the popup is dismissed. You can
press Escape at any time in the popup to abort the move and restore the filter set to its original ordering.
To display a view-only table of input or output filters, select Display/Change Input Filter or Display/Change
Output Filter in the Display/Change Filter Set screen.
To modify a filter, select Display/Change Input Filter or Display/Change Output Filter in the Display/Change
Filter Set screen to display a table of filters.
Select a filter from the table and press Return. The Change Filter screen appears. The parameters in this
screen are set in the same way as the ones in the Add Filter screen (see
page 13-14).
1.1.1.1 0.0.0.0
000000000000 000000000000
4.4.4.4 0.0.0.0
3.3.3.3 0.0.0.0
5.5.5.5 0.0.0.0
ANY -- --
0 = No
ANY -- --
ANY -- --
ANY -- --
"Adding filters to a filter set" on
Security 13-17
Yes No |
Yes No |
Yes No |
Yes No |
Yes No |
|
|
|
|
|
|
|
|
|
|
|