Netopia R5000 User Reference Manual page 220

R5000 series router
Table of Contents

Advertisement

14-4 User's Reference Guide
time
Packets Lost: The number of packets unaccounted for, shown in total and as a percentage of total packets
sent. This statistic may be updated during the Ping test, and may not be accurate until after the test is over.
However, if an escalating one-to-one correspondence is seen between Packets Out and Packets Lost, and
Packets In is noticeably lagging behind Packets Out, the destination is probably unreachable. In this case, use
STOP PING.
Round Trip Time (Min/Max/Avg): Statistics showing the minimum, maximum, and average number of
seconds elapsing between the time each Ping packet was sent and the time its corresponding return Ping
packet was received.
The time-to-live (TTL) value for each Ping packet sent by the Netopia R5000 Series Router is 255, the maximum
allowed. The TTL value defines the number of IP routers that the packet can traverse. Ping packets that reach
their TTL value are dropped, and a "destination unreachable" notification is returned to the sender (see the
table on the previous page). This ensures that no infinite routing loops occur. The TTL value can be set and
retrieved using the SNMP MIB-II ip group's ipDefaultTTL object.
send Ping packet 1
Netopia
receive return Ping packet 1
Netopia
send Ping packet 2
Netopia
send Ping packet 3
Netopia
receive return Ping packet 2
Netopia
receive return Ping packet 3
Netopia
receive Ping packet 1
send return Ping packet 1
receive Ping packet 2
send return Ping packet 2
receive Ping packet 3
send return Ping packet 3
host
host
host
host
host
host

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R5100R5200R5300

Table of Contents