Removing Rear Wheel - BMW S 1000RR Rider's Manual

Tighten right axle clamping
9
screws 1 to specified tight-
ening torque.
126
Clamping screw in axle
adapter
14 lb/ft (19 Nm)
Remove front wheel stand and
auxiliary stand.
Ease brake calipers onto brake
disks.
z
Position clip 6.
Install screws 2 on left and
right with appropriate torque.
Radial brake calipers on
the axle adapter
28 lb/ft (38 Nm)
Insert ABS sensor into hole
and install screw 1.
Remove adhesive tape from
wheel rim.
Press handbrake lever firmly
a number of times until resis-
tance point is felt.

Removing rear wheel

Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing the auxiliary stand on
the rear wheel ( 131).
Support the rear wheel, e.g.,
with a wooden block, so that