BMW S 1000RR Rider's Manual page 135

Remove the cover 1 to replace
the low-beam bulb.
Remove the cover 2 to replace
the high-beam bulb.
Disconnect plug 3.
Remove spring wire brackets 4
from their detents on left and
right and swivel them up.
Remove bulb 5 from the
socket.
Replace defective bulb.
Bulbs featuring specifi-
cation ratings for higher
levels of illumination are com-
mercially available as special ac-
cessories. These bulbs have a
shorter service life than conven-
tional bulbs and also generate
more heat. Under some circum-
stances the high levels of heat
radiation can damage the head-
light assembly.
Bulbs for low-beam
headlight
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
To avoid contamination on the
bulb's glass surface, never
touch or hold the bulb any-
9
133
z