BMW S 1000RR Rider's Manual page 131

Make sure that the ABS
sensor 9 is not damaged when
rolling the rear wheel into
place.
Roll rear wheel further into
swing arm while simultaneously
pushing brake caliper carrier 10
toward the front.
Roll rear wheel as far forward
as possible and lay chain 7 on
sprocket.
Insert the right side shim 6 in
the swing arm with the travel
stop 12 pointing toward the
front.
Raise the rear wheel and in-
stall the quick-release axle 5
through the shim in the brake-
caliper support and the rear
wheel.
Ensure that the quick-release
axle seats securely against the
travel stop on the adjustment
plate.
9
129
z