BMW S 1000RR Rider's Manual page 46

When the motorcycle comes
4
to a stop, the selected riding
mode is activated after approx.
44
ten seconds.
The new riding mode is acti-
vated during operation under
the following conditions:
Brakes not engaged
Throttle turned all the way
back
Clutch disengaged
After the new riding mode is
z
activated, the selection menu
disappears.
The configured riding mode
with the corresponding adapta-
tions of the engine character-
istics, ABS and DTC is main-
tained, even after the ignition is
switched off.
Installing coding plug
When the coding plug is
used, the operating permit
for public roads is voided.
Do not use the encoding plug on
public roads.
Switch off ignition.
Removing driver's seat (
Dirt and moisture can get
into the open plug and
cause malfunctions.
After removing the encoding
plug, refit the cover cap.
Open cable ties and remove
cover cap of the plug connec-
tion 1.
54).
To do so, press the locking
device 2 down and pull off the
cap by pulling it upwards.
Insert the coding plug.
Switch on ignition and secure
plug connection using a new
cable tie.