BMW S 1000RR Rider's Manual page 96

6
94
Carefully disconnect anti-theft
alarm system bracket 5 from
rear frame and rotate it upward.
z
Activate locking mechanism 6
and disconnect plug.
Press locking mechanism 7
to left with small screwdriver
while simultaneously sliding
connector toward rear off anti-
theft alarm system bracket.
Remove anti-theft alarm sys-
tem bracket.
Protect connector plugs on
motorcycle against contamina-
tion.
Detach screws 8 with wash-
ers and remove license-plate
carrier. Guide cable through
opening 9 when doing so.
Installing passenger seat
( 53).
Installing license-plate
carrier
Make sure ground is level and
firm and park motorcycle.
Removing passenger seat
( 53).