BMW S 1000RR Rider's Manual page 63

The indicator and warning lamps
go out.
The display reverts to the stan-
dard format.
Should one of the warning lamps
fail to appear:
If it was not possible to
switch on the warning
lights, possible malfunctions
cannot be indicated.
Watch all warning and indicator
lights on the display.
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
The readiness for operation of
the BMW Motorrad Race ABS
is checked by the self-diagnosis.
The self-diagnosis routine runs
automatically when you switch on
the ignition. To check the wheel
sensors, the motorcycle must be
driven a few yards.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while vehicle is parked.
ABS warning lamp flashes.
Phase 2
Checking wheel sensors while
starting off.
ABS warning lamp flashes.
ABS self-diagnosis
completed
The ABS warning lamp goes
out.
If an ABS error is indicated fol-
lowing completion of the ABS
self-diagnosis routine:
It remains possible to continue
riding. Please be aware that
neither the ABS nor the inte-
gral function is available.
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
DTC self-diagnosis
with BMW Motorrad DTC
The readiness for operation
of the BMW Motorrad DTC is
checked by the self-diagnosis.
The self-diagnosis routine runs
automatically when you switch on
the ignition.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while vehicle is parked.
DTC warning lamp flashes
slowly.
5
61
OE
z