Lamps - BMW S 1000RR Rider's Manual

9
132
Install the mounting pins (83
30 2 152 841) 1 on the left
and right into the rear wheel
swing arm, tightening to speci-
z
fied torque.
Adapter on rear wheel
swinging arm
15 lb/ft (20 Nm)
Turn in the bracket 2 with the
long sides facing the outside.
Adjust the mounting pieces 3
to the width of the pins
inserted into the rear wheel
swing arm.
Adjust the height of the aux-
iliary stand so that the rear
wheel is lifted slightly off the
ground.
Attach the auxiliary stand to
the rear wheel swing arm and
press it on the ground evenly.

Lamps

Replacing low-beam and
high-beam bulbs
The alignment of the con-
nector may differ from the
illustration depending on the bulb
to be replaced.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.