BMW S 1000RR Rider's Manual page 144

Connecting battery to
9
vehicle
142
First install positive battery ca-
ble 2.
z
Then install negative battery
cable 1.
Installing driver's seat (
Charging battery
Disconnecting battery from
motorcycle (
Charge battery using a suitable
charger.
Comply with operating instruc-
tions of charger.
Once battery is fully charged,
disconnect charger's terminal
clips from battery terminals.
not being used, the battery must
be recharged regularly. See the
instructions for caring for your
battery. Always fully recharge
the battery before returning it to
use.
Connecting battery to vehicle
(
Removing battery
Disconnecting battery from
54).
motorcycle (
Lift battery upwards; if it is dif-
ficult to move, moving it back
and forth will help.
141).
Installing battery
tery for a longer time, the current
date must be entered in the in-
In the case of longer peri-
ods when the motorcycle is
142).
141).
If the motorcycle was dis-
connected from the bat-
strument cluster to ensure the
proper operation of the service
display.
Consult a certified service fa-
cility, preferably an authorized
BMW Motorrad retailer, for set-
ting of the date.
Place battery in battery com-
partment, positive terminal on
right in direction of travel.
Connecting battery to vehicle
( 142).
Setting clock ( 35).