BMW S 1000RR Rider's Manual page 140

9
138
Install screw 1.
Diode tail light
If more LEDs have burned out in
z
the tail light than are indicated in
the Technical Data below, the tail
light bulb must be replaced. In
this case:
Contact an authorized service
facility, preferably an authorized
BMW Motorrad retailer.
Maximum number of de-
fective LEDs in taillight
1
Replacing license plate
light
Pull license-plate light 1 out of
lamp housing.
Pull bulb out of socket.
Replace defective bulb.
Bulb for license-plate
light
W5W / 12 V / 5 W
To prevent contaminants from
being deposited on the new
bulb's glass surface, always use
a clean, dry cloth to hold it.
Press bulb into socket.