BMW S 1000RR Rider's Manual page 99

Mount side panel in rubber
buffer at position 4.
Install screws 3 with washers.
Install screws 2.
Install screw 1.
Position the wind deflection
wing 2 ensuring that is on the
correct side.
The letters "R" for the right
side and "L" for the left side
are stamped on the surfaces of
the deflector panels.
Install screws 1.
Installing front turn signal
Unfasten the screws 1 then
remove the wind deflection
wing 2.
Remove the screw 1 on the
inside of the right side panel.
6
97
z